ThinnedWireWireWaveguideTransitionLinear

class picazzo3.traces.thin_wg.ThinnedWireWireWaveguideTransitionLinear

Transition from/to thinned wire to/from wire waveguides.

You can provide either a thinned wire for the start, and wire for the end, or vica versa.

Parameters:

end_trace_template: PCell and _TraceTemplate and WireWaveguideTemplate, ThinnedWaveguideTemplate

start_trace_template: PCell and _TraceTemplate and WireWaveguideTemplate, ThinnedWaveguideTemplate

name: String that contains only ISO/IEC 8859-1 (extended ASCII py3) or pure ASCII (py2) characters

The unique name of the pcell

Other Parameters:

reverse_templates: ( bool, bool_ or int ), locked

When True, treat start_trace_template as end_trace_template and vice versa. To use the correct templates, use the _{start/stop}_trace_template properties. This should not be set manually, but calculated by the transition itself.

Views

class Layout

Parameters:

tip_width: float and number > 0

straight_extension: Coord2 and number >= 0

tuple: straight extension at start and end of transition

end_position: Coord2

end position of the transition

start_position: Coord2

start position of the transition

view_name: String that contains only alphanumeric characters from the ASCII set or contains _$. ASCII set is extended on PY3.

The name of the view

Other Parameters:

length: float and Real, number and number >= 0, locked

length of the transition

Examples

"""This example shows how you transition from a thinned wire to a wire waveguide."""
import si_fab.all as pdk  # noqa: F401
from picazzo3.traces.wire_wg import WireWaveguideTemplate
from picazzo3.traces.thin_wg import ThinnedWaveguideTemplate, ThinnedWireWireWaveguideTransitionLinear
import ipkiss3.all as i3

wg_start_wire = WireWaveguideTemplate()
wg_start_wire.Layout(core_width=0.6, cladding_width=0.6 + 2 * i3.TECH.WG.TRENCH_WIDTH)

wg_start = ThinnedWaveguideTemplate(trace_template=wg_start_wire)
wg_start.Layout(thin_width=1.0)

wg_end = WireWaveguideTemplate()
wg_end.Layout(core_width=0.6, cladding_width=0.6 + 2 * i3.TECH.WG.TRENCH_WIDTH)

t = ThinnedWireWireWaveguideTransitionLinear(
    name="test_ThinnedWireWireWaveguideTransitionLinear",
    start_trace_template=wg_start,
    end_trace_template=wg_end,
)

t_lay = t.Layout(start_position=(3.0, 3.0), end_position=(23.0, 3.0), straight_extension=(0.3, 0.4))

t_lay.visualize(annotate=True)